hubbellpowersystems.com/contact/
Brackets, Conduit Standoff
A multi-purpose bracket for mounting 1" through 6" conduit in a variety of ways. Bracket will mount up to four 6" conduits with unlimited adjustability. 4-Way T-Slot extrusion eliminates field drilling. Unit mounts to the pole on 35/8" hole centers using 5/8" thrubolt and 1/2" lag (not supplied). Conduit straps are not included, order below. Additional T-Slot Shapes are available on the following page.
| Catalog Number | Offset from Pole Face - A |
T-Slot Length - B |
Mounting Bolt Spacing |
Accommodates Mounting Hardware |
Approx. Ship Wt. per Each |
|---|---|---|---|---|---|
| C6CSO | 6" | NA | 3 5/8" | 5/8" Machine Bolt & 1/2" Lag Screw |
2.31 lbs. |
| C6CSO6 | 6" | 3.03 lbs. | |||
| C6CSO8 | 8" | 3.10 lbs. | |||
| C6CSO12 | 12" | 3.50 lbs. | |||
| C6CSO18 | 18" | 4.44 lbs. | |||
| C6CSO24 | 24" | 4.85 lbs. | |||
| C6CSO36 | 36" | 5.81 lbs. | |||
| C9CSO12 | 9" | 12" | 4.81 lbs. | ||
| C9CSO24 | 24" | 6.02 lbs. | |||
| C9CSO36 | 36" | 7.88 lbs. |
Conduit Strap Kits
Strap kits with the following variations are available for use with the conduit standoff brackets above. The straps have two holes for mounting one conduit section. Each strap kit contains a strap, two each 1/2" x 11/4" hex head bolts, lockwashers and hex nuts.
| Catalog Number | Accommodates Conduit Sizes |
Inside Dia. - A |
Mounting Hole Spacing - B |
Width - C | Depth - D | Approx. Ship Wt. per Each |
|---|---|---|---|---|---|---|
| CSTK1 | 1" | 1-3/8" | 3" | 4-1/8" | 1-1/4" | 0.30 lbs. |
| CSTK15 | 1-1/2" | 1-7/8" | 3-1/2" | 4-5/8" | 1-7/8" | 0.35 lbs. |
| CSTK2 | 2" | 2-3/8" | 3-15/16" | 5-1/16" | 2-1/4" | 0.40 lbs. |
| CSTK25 | 2-1/2" | 2-7/8" | 4-7/16" | 5-9/16" | 2-3/4" | 0.45 lbs. |
| CSTK3 | 3" | 3-1/2" | 5-1/16" | 6-3/16" | 3.3/8" | 0.50 lbs. |
| CSTK35 | 3-1/2" | 4" | 5-9/16" | 6-11/16" | 3-15/16" | 0.60 lbs. |
| CSTK4 | 4" | 4-1/2" | 6-1/16" | 7-3/16" | 5.3/8" | 0.65 lbs. |
| CSTK5 | 5" | 5-9/16" | 7-1/8" | 8-1/4" | 5-1/2" | 0.70 lbs. |
| CSTK6 | 6" | 6-5/8" | 8-3/8" | 9-5/16" | 6-1/2" | 0.75 lbs. |
For versatile equipment mounting, these custom T-Slot shapes are extruded from high-strength, heat-treated 6061T6 aluminum alloy.
4-Way T-Slot
| Catalog Number | Length - A | Approx. Ship Wt. per Each |
|---|---|---|
| C4WT12 | 12" | 1.25 lbs. |
| C4WT24 | 24" | 2.25 lbs. |
| C4WT36 | 36" | 3.25 lbs. |
| C4WT48 | 48" | 4.50 lbs. |
| C4WT60 | 60" | 5.50 lbs. |
| C4WT120 | 120" | 11.00 lbs. |
2-Way T-Slot
| Catalog Number | Length - A | Approx. Ship Wt. per Each |
|---|---|---|
| C2WT12 | 12" | 1.25 lbs. |
| C2WT24 | 24" | 2.50 lbs. |
| C2WT36 | 36" | 3.75 lbs. |
| C2WT48 | 48" | 5.00 lbs. |
| C2WT60 | 60" | 6.25 lbs. |
| C2WT120 | 120" | 12.50 lbs. |
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |